Laminate Flooring Installation Basics
Whether you are a do-it-yourselfer or are preparing for a professional installation, knowing the basics of laminate flooring installation will help make the process run smoothly. Make sure the room is ready for the flooring by cleaning and repairing any cracks and holes. This will ensure a good fit for your new flooring.
Choosing the right material for your project before starting Laminate Flooring Installation Chicago Suburbs is a key step because it affects everything from the finished look to how easy it will be to clean and maintain.
Laminates are made from a top protective layer, a design layer, and a wear layer that is designed to withstand foot traffic, scratches, stains, and dents. Some laminates also feature water-resistant properties that make them appropriate for kitchens, bathrooms, and laundry rooms.
If you want to install laminate flooring independently, you will need a few basic tools. A tape measure, a saw, and a hammer are essential. You will also need a taping block, a pull bar, and spacer wedges.
Determining the square footage of the room where you plan to install the floor will help you determine how much material to buy. You can calculate this by multiplying the room’s length by width.
When buying laminate, be sure to add 5 to 10% extra to ensure you have enough to cover any waste material. This will also give you more material to repair or replace pieces as the floor ages.
Before you begin installing the flooring, it is important to allow the materials time to acclimate to the temperature and humidity of your home. This will prevent the pieces from buckling and pulling apart once they are installed.
Laminate flooring is an excellent choice for most rooms and floors. It is durable, scratch-resistant, and comes in a variety of colors and designs.
Before you start laying the laminate, it is a good idea to cut the planks to the proper size. The last plank on each row should be at least 12 inches in length. This will keep the rows from looking crooked and will ensure that all the tongues and grooves are properly aligned.
Whether you’re installing laminate flooring yourself or hiring someone to do it for you, it’s important that you measure the area of your room before ordering. This will ensure that you get enough flooring to cover your space and will help you avoid unnecessary costs.
You can use a tape measure to determine the length and width of your room. Then multiply the length by the width to calculate your square footage. This will give you the amount of laminate you need to purchase.
Once you know the number of pieces you’ll need, it’s easy to order the correct amounts. You can also use a laminate floor calculator to calculate the exact surface area you’ll need for your project.
Laminate is a popular choice for home improvement projects because it’s easy to clean and can be installed by almost anyone. It’s also affordable and comes in a variety of designs and colors to suit any home. You can even install it in areas that aren’t usually accessible, such as basements and attics. Before you begin, be sure to read the installation instructions on the product packaging for important information on how to properly prepare the floor. Then, you’ll be ready to install your new laminate floors! You may want to consider installing a moisture barrier underneath the floor to help prevent water damage and warping. This will help your laminate last longer and make the process more convenient.
When choosing the right type of laminate, consider your budget and how much you plan to use it. You may want to select a more durable laminate that will resist bending and denting, or you may prefer a less expensive option that is easier to install.
The thickness of your laminate flooring is another factor to consider. It is recommended that you choose a product that is at least 10 mm thick. This will make your floors more stable and prevent them from rattling or creaking.
When installing laminate, you’ll often need to close seams that have jiggled slightly during installation. This can be done with a tapping block, which is sold in kits that include a pull bar and mallet.
You’ll also need to measure your room carefully to ensure that you have enough material. You can do this by using a tape measure to determine the length and width of your room. Then, you can multiply these numbers to calculate your square footage.
When installing laminate floors, it is important to use the correct underlayment. This layer of material is used to level the subfloor and also to help the planks to stay in place. It also helps reduce noise and acts as a moisture barrier.
Underlayment comes in different materials, such as foam, cork, and felt. The best underlay for laminate flooring depends on the type of floor being installed and the environment in which it will be placed.
Foam underlay is usually the most popular, and it is inexpensive and available in large rolls. It can be laid over wood floors, concrete, and many other types of floors.
Some underlayment products also include a vapor barrier, which is a must when installing above a concrete subfloor. This will prevent moisture from rising and damaging the planks.
Another underlayment option is acoustic underlay, which is made from high-density rubber sponge and can be useful in bedrooms or in flats where the residents can hear the noises of their neighbors. It also provides good insulation, which will keep your house warmer and more comfortable.
Underlayment can be a bit tricky to install, especially foam underlay, which has a tendency to slip in the installation process, so make sure that you follow instructions and tap it in place before laying it over your subfloor. If you are not using a self-adhesive underlay, then make sure that you tape the foam to seal the seams together before laying the flooring over it.
Laminate flooring is a good option for people who want to create a floor that looks like wood. It is relatively easy to install and can give your home a unique look.
Several important considerations must be taken into account before installing laminate floors. These include color, texture, and design. You should also choose the material from which you will buy your planks, as it will greatly affect how they look.
For example, if you want the flooring to have a high-gloss finish, it is best to avoid low-gloss materials. In addition, you should consider whether the floor will need to be waterproof or if it will have to be insulated against humidity and temperature fluctuations.
In most cases, you will need to install a layer of underlayment before the planks are installed. This will help preserve and insulate your new floor, as well as reduce noise and dampen vibrations.
After you have measured the area, you need to purchase enough underlayment to cover the area that you will be covering with laminate flooring. It is important to leave at least a 10 percent excess area around the perimeter, as this will help to prevent sagging or buckling due to expansion and contraction.
Next, begin laying the planks. Ideally, you should start at the longest wall of the room and apply the flooring parallel to that wall. However, if there is a doorway or large window near one of the walls, you may want to apply the flooring perpendicular to the wall. This will provide a nice, uniform seam along the wall, and it is less work than running the boards parallel to the long wall.
Whether it’s custom-finished moldings or trim pieces, finishing touches are essential to creating a beautiful look for your laminate floor. They help to make your floor look like it was professionally installed, and they also give the room a more finished look.
Depending on what you’re installing, finishing touches may include moldings to cover the perimeter gap, quarter-round trim pieces, or other transition trim pieces where your flooring meets a different type of flooring, such as carpeting. These finishes are typically added by the installers as part of their overall installation process.
If you’re installing your new flooring over an existing floor, it is important to prepare the subfloor by removing any baseboards or moldings and using a vapor barrier to prevent moisture from causing warping. If your floor is already uneven, the installers will need to level the subfloor and repair any cracks or holes.
In addition, the installers will install spacers every one per square foot to maintain accurate and consistent spacing around the perimeter of the room. This is done to allow the floor to expand and contract naturally from season to season as it acclimates.
The spacers are removed once the installation is complete, and then the wall base or quarter-round trim is added to cover up the perimeter gap. In high-humidity rooms, such as a bathroom or a laundry room, it is best to install a vapor barrier before the flooring is laid down.